The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized. Should the battery be accidentally overcharged producing hydrogen and oxygen, special one-way valves allow the gases to escape thus avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak proof and usable in any position.

Construction

·        Component: Raw materia

·        Positive plate: Lead dioxide

·        Negative plate:Lead

·        Container: ABS

·        Cover: ABS

·        Safety valve: Rubber

·        Terminal: Copper

·        Separator:Fiberglass

·        Electrolyte:Gelled acid

Features

·       Completely sealed valve regulated construction and can be used in multiple orientations (upside-down is not recommended)

·       German alpha EV technology for high deep cycle charge and discharge ability

·       Tailor-made micro porous microfiber AGM and tight assembly process to aviod short circuit

·       Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance or water adding

·       Computer designed lead, calcium tin alloy grid for high power density

·      Gel electrolyte without lamination and hydration phenomena has low water loss and high charge receptivity

·       The electrolyte with high purity and specific additive formula can prevent self discharge.

·       Dung dịch điện phân: Axit Gel

 

 

General Specifications

*** DOWNLOAD – Please click on the product code to download the detailed catalog!

Model Nominal Voltage(V) Nominal Capacity   (10hr/Ah) Length Width Height Total height Weight (Approx)
mm in mm in mm in mm in Kg Ibs
12V14AH 12 12 151 5.95 99 3.90 98 3.85 103 4.05 4.50 9.92
12V12AH 12 12 151 5.95 98 3.89 97 3.84 102 4.03 4.20 9.90